Price : $12.50
You Save : $7.24 (37%)
Item Description
Amazon.com Item Description
The Firex i4618 Hardwire Smoke Alarm by Kidde is an ionization smoke alarm that operates on a 120V power source with 9V battery backup. The Firex i4618 smoke alarm gives a number of positive aspects for installers and homeowners, such as its effortless-access slide load front battery door.
This alarm is powered by your home’s electricity and will interconnect with other smoke alarms in your residence. Specialists advise interconnected alarms, because when 1 sounds, they all sound, providing an early warning against fire by dramatically rising your potential to hear an alarm anywhere in your dwelling, regardless of exactly where the fire starts.
This alarm uses ionization sensing technology. Ionization sensing alarms may very well detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may possibly detect visible particles (connected with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that each ionization and photoelectric smoke alarms be installed to assist insure maximum detection of the a number of kinds of fire that can happen inside the house.
Firex i4618 Hardwire Smoke AlarmUser-Friendly Attributes
- Very easy access slide load front battery door
- Battery backup provides protection in case of a power failure
- Interconnectable with up to 24 devices (of which 18 can be initiating) such as smoke, CO and heat alarms
Slide load front battery door delivers painless access for changing battery backup. .
The i4618 smoke alarm delivers painless installation attributes. .
Provides the advised protection of an interconnected program. When 1 alarm goes off, they all do. .
Simple Installation
- Front battery pull tab makes it possible for battery activation without removing alarm from mounting bracket.
- Large mounting base tends to make mounting much easier, protects surface paint from dirt and covers imperfections.
- Pre-stripped wiring harness with straightforward off cap does not demand stripper tool. Tinned strands enhance conductivity and wire nut grip.
Fewer Callbacks
- Big centrally located Test/Hush¨ alarm control button.
- Dust cover protects sensor from contaminates throughout construction reducing nuisance alarms.
User Friendly Features
- Painless access front loading battery door.
- Battery backup provides protection in case of power failure.
- Interconnectable with up to 24 devices (of which 18 can be initiating) which includes smoke, CO and heat alarms. See user’s guide for complete directions.
Interconnectable for Improved SafetyFire and consumer specialists advise interconnected alarms for added protection. According to the National Fire Protection Association (NFPA), most Americans feel they are far more at risk of becoming a victim of a tornado than of a home fire. Truly the opposite is true. Fires are alot more frequent than any other disaster that strikes a household at home, and can come to be deadly in minutes.
You have on typical much less than three minutes from the time you hear a smoke alarm to escape a fire. The sooner you hear an alarm, the sooner you can get out safely. Smoke alarms that link together so that when one particular goes off, they all go off, are called interconnected alarms. These alarms provide a lot more warnings in much more areas, giving your family even more time to escape a house fire. Houses built right after 1993 are necessary by making codes to have interconnected alarms that are wired into their electrical process.
Interconnects with Other DevicesInterconnects with all Kidde, Firex, Fyrnetics, Lifesaver and Nighthawk alarms, strobe lights, and relay modules with interconnect functionality.
Trademarked Hush Function for ConvenienceBy pressing the Hush button, you can very easily and safely silence nuisance alarms caused by non-emergency scenarios, such as overcooked dinners.
This alarm's Smart Hush function has the capability of temporarily desensitizing the alarm circuit for up to 8 minutes. This function is to be utilised only when a known alarm condition, such as smoke from cooking, activates the alarm. The smoke alarm is desensitized by pushing the Test/Hush button on the smoke alarm cover. If the smoke is not as well dense, the alarm will silence instantly. The red LED will illuminate for 1.5 seconds each and every 8 seconds whilst in hush. This indicates that the alarm is in a temporarily desensitized condition. The smoke alarm will automatically reset right after approximately 8 minutes and sound the alarm if particles of combustion are nonetheless present. Intelligent Hush can be put to use repeatedly till the air has been cleared of the condition causing the alarm. Pushing the Test/Hush button on the alarm will finish the hush period.
Reliable 9-Volt Battery Backup, Indicator LED, and Test FeatureBecause a smoke alarm only assists defend you if it's operating, this unit functions a red LED that flashes every single 30 to 40 seconds to indicate that it is operating appropriately. For extra peace of mind, the alarm also contains a test/reset button that enables you to periodically test its circuitry and horn.
The alarm’s regular 9-volt battery delivers continuous protection against smoke and fire hazards, even in the course of power outages. The unit delivers a low battery warning that troubles a brief chirp every 30 to 40 seconds for at least seven days prior to losing power, letting you know that it really is time to adjust the battery.
The unit measures just 5.6 inches in diameter and 1.8 inches deep, and it attributes a neutral, white finish. It consists of tamper resist attributes to deter vandalism or theft.
This alarm is UL listed, so you can be confident of its good quality, and it is backed by a five-year restricted warranty.
About Kidde: A UTC Fire Security Brand Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems.
Kidde is a UTC Fire Security brand, with a history that is wealthy with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world's initially wireless networked smoke detectors in 2004.
What's in the BoxOne i4618 ionization smoke alarm with mounting bracket and mounting hardware, one particular 9 volt battery, a five-year limited warranty and a bilingual user's manual.
The 120 volt Firex 4618 Pro Fundamental smoke detector has an ionization Sensor, rapid connect power harness, is multi-station interconnectable, has a five year warranty, and is not available to members in Iowa, Oregon Or Vermont.
See all Item Description
Consumer Critiques
My household was built in 2001, and it was equipped with Firex 120-1072B units in each and every space wired for interconnectivity. 1 of my units began to sound randomly even when there was no fire. I tried changing the battery, but I nonetheless had the very same outcomes. So immediately after looking web based, I located that the Kidde i4618 is the existing replacement model.
Just after purchasing the model, I was hoping that I could use an adapter amongst the wiring in my Firex unit and the Kidde. Then again, I discovered that I was mistaken in what I believed I had read. I am about as unhandy a man as they come, and I extremely wasn't seeking forward to rewiring for the new unit. The hardest portion of the course of action turned out finding the correct breaker as mine are not labeled. At least for my home (please know that yours could properly be numerous), the smoke detectors were on a devoted breaker. When I located it and switched it off, it was fairly hassle-free from there. I removed the two screws from the bracket of the Firex unit and then uncapped the wires. The Firex wires had been effortless to take away. I rewired black, white, and red as indicated and put the yellow caps back on to cover the wires. Then it was a easy matter of screwing in the new mount, connecting the wire, and twisting the Kidde unit into spot. As soon as I flipped the breaker back on, every little thing was back to standard.
There is a single good thing on these new units. The battery door is on the face of the unit rather than the back. The old Firex unit has the battery in the back, and it was a discomfort to replace the battery. Another good improvement of the Firex unit is the power connector is substantially a lot easier to plug and unplug without having being insecure.
So if this is the replacement for your old Firex smoke alarm, do not hesitate to get this one from Kidde. I'm pleased with the outcomes, and I assume you will be also. Please really feel totally free to ask questions in the comments section below.
We moved into a home that was built back in 1985. Along with a multitude of other tiny fixes and updates that essential undertaking, I noticed that the upstairs smoke detector was seeking a little loose on the ceiling. Upon giving it a twist, the bracket broke, and the detector subsequently hung in a jaunty, festive way from just the wires. And I noticed that this was the ORIGINAL smoke detector, dated from 1985. Okay, there's a different thing needing replaced.
Installation was a breeze - cut the power, pull the old 1, match the correct wires on the harness (white/white, black/black, red/red), screw in the new mounting bracket, plug it in, lock it in place, turn the power back on.
BZZZZZZZZZZZZZZZZZZZZZ / BEEEEEEEEEEEEEEEEEEEEP!
Oops! The 2010 model smoke detector didn't want to play properly with the other 1985 smoke detector that I hadn't even noticed downstairs, and they were each going off simultaneously. Okay, swap that one out as well, and... blissful silence, and a comforting green light shines from each 1.
Trust me: if I could install this, Any one can install this. I can't even hammer a nail straight.
Related Product
No comments:
Post a Comment